in
Search 61,117 posts and 751 resources contributed by 27,519 members or post a topic.

Already Joined? Sign in
Cisco 4506 switch - no data

Page 1 of 1 (3 items) | RSS

rated by 0 users
Not Answered This post has 0 verified answers | 2 Replies | 2 Followers


38 Posts
Points 113
rlawsha posted on Mon, Nov 3 2008 7:28 AM
rated by 0 users

Have a Cisco 4506 switch but I can't seem to get data to NetFlow. I have installed the NetFLow card in the switch and configured everything but no data gets to Orion NetFlow. I have the following command in our switch, am I missing anything?

ip flow-export source GigabitEthernet5/1
ip flow-export version 5
ip flow-export destination 10.10.245.1 2055

My NetFlow collector service is up. I have the interface selected. On the switch if you do a sho ip flow export you see this:

Flow export v5 is enabled for main cache
  Exporting flows to 10.10.245.1 (2055)
  Exporting using source interface GigabitEthernet5/1
  Version 5 flow records
  3835549 flows exported in 127854 udp datagrams
  0 flows failed due to lack of export packet
  0 export packets were sent up to process level

running 12.2(25)ew IOS...

 

But still on the Orion web site in the NetFlow Traffic Analysis Summary area you still see LAST DATA RECEIVED: never

 

  • | Post Points: 3

All Replies


191 Posts
Points 645
SolarWinds Certified Professional
kweise replied on Mon, Nov 3 2008 8:32 AM
rated by 0 users

Did you enable NetFlow on any of your interfaces?  The ip-flow export source only tells the switch switch interface to source the NetFlow traffic from.  If you do a show ip flow interface, it will list all the interfaces you have flow statements on.  To enable an inteface for Netflow, you go to config mode for the interface and enter ip flow ingress or ip flow egress.  (Some older version of IOS don't support ip flow ingress or ip flow egress.  For those version, the interface command is  ip route-cache flow.) 

Most of the Netflow configs I've done are on routers, switches work a bit differently.  You might need to put an ip route-cache flow statement in global config mode to enable Netflow.

One other thing to check.  The IP address of the Netflow source must match the IP address Orion is using to monitor the node.  If the source of your Gig 5/1 interface doesn't match the IP address in Orion, the Netflow module will never see the flow.

If all else fails, check the Cisco config guide chapter on Netflow here:

 http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/20ew/configuration/guide/nfswitch.html

Hope this helps.

  • | Post Points: 3

38 Posts
Points 113
rlawsha replied on Mon, Nov 3 2008 9:48 AM
rated by 0 users

got it working this way.... 

ip route-cache flow infer-fields
ip flow ingress infer-fields
ip flow-export source GigabitEthernet5/1
ip flow-export version 5 peer-as
ip flow-export destination 10.10.245.1 2055

found a document here: http://www.solarwinds.com/support/Netflow/docs/OrionNetFlowSwitches.pdf

 

  • | Post Points: 1
Page 1 of 1 (3 items) | RSS

© 2003 - 2009 SolarWinds, Inc. All Rights Reserved.

Who is SolarWinds?

SolarWinds is rewriting the rules for how companies manage their networks. Guided by a global community of network engineers, SolarWinds develops simple and powerful network management software for networks of all sizes.

What is thwack?

thwack, SolarWinds online community site, was designed by network engineers, for network engineers. thwack is a vibrant, growing community of more than 20,000 IT pros who share a passion for technology.

Explore Resources, Answers, Templates, and Advice

Download Free Networking Tools

Learn More About SolarWinds Products